JDC-0402Z-VT003 connector plug

Technical Specifications

Material Name: JDC-0402Z-VT003 Connector Base

● Specification and model: JDC-0402Z-VT003

● Environmental information: Comply with RoHS requirements

● Technical parameters after connecting with corresponding plugs:

■ Electrical characteristics

▲ The contact resistance and rated current comply with the provisions in Table 1

Table 1

▲ Rated voltage: 12 # contact 380V AC

▲ Withstand voltage value: contact normal 1000V AC, damp heat 500V AC

▲ Insulation resistance ≥ 3000M Ω (normal temperature); ≥ 100M Ω (damp heat)

■ Mechanical characteristics

▲ Mechanical life 200 times

■ Materials and surface treatment

▲ Contacts

Material: copper alloy

Production process: machining

Surface treatment: 12 #: silver plating; Signal terminal: semi gold fog tin

▲ Shell material and process molding

Material: engineering plastic, UL94V-0, black

Production process: injection molding

■ Working environment

▲ Temperature - 40 ℃~+125 ℃

▲ When the humidity is 40 ℃, 90%

● Material introduction:

■ Basic information

When fitting a plug with a socket, there are both columnar protrusions around the pin hole for guidance and chamfered guidance at the front end of the plug part pin itself. Multiple guidance ensures a good fit between the plug and socket after installation.

■ Packaging and storage

The product is packaged in a blister box and then boxed. The packaging box is marked with the material code, specification and model, quantity, measurement unit, inspection signature, production date, unit name, contract number, etc. Each packaging box can only contain the same batch of products, and the packaging box has a mark that meets the corresponding transportation requirements specified in GB191.

Products packaged in boxes should be stored in a warehouse with an ambient temperature of 20 ℃ to 25 ℃, a relative humidity of less than 70%, and no acidic, alkaline, or other corrosive gases in the surrounding air. Under the above conditions, the storage period should not exceed 1 year from the production date.

■ Matching relationship

The socket JDC-0402Z-VT003 is used in conjunction with the plug JDC-0402T-RT003.

■ Process Use  

▲ Plug termination method: soldered wire type 

▲ The fitting speed of the installed plug and socket is recommended not to exceed 5 times per minute.

During operation, the plug must be fully inserted into place when connected to the socket, and no additional devices are allowed to be added between the plug and socket mating surfaces to avoid

Affecting the contact reliability of connectors.

■ Overall dimensions

JDC-0402T-RT003 connector plug

Technical Specifications

Material Name: JDC-0402T-RT003 Connector Plug

● Specification and model: JDC-0402T-RT003

● Environmental information: Comply with RoHS requirements

● Technical parameters after connecting with corresponding plugs:

■ Electrical characteristics

▲ The contact resistance and rated current comply with the provisions in Table 1

Table 1

▲ Rated voltage: 12 # contact 380V AC

▲ Withstand voltage value: contact normal 1000V AC, damp heat 500V AC

▲ Insulation resistance ≥ 3000M Ω (normal temperature); ≥ 100M Ω (damp heat)

■ Mechanical characteristics

▲ Mechanical life 200 times

■ Materials and surface treatment

▲ Contacts

Material: copper alloy

Production process: machining

Surface treatment: 12 #: silver plating; Signal terminal: semi gold fog tin

▲ Shell material and process molding

Material: engineering plastic, UL94V-0, black

Production process: injection molding

■ Working environment

▲ Temperature - 40 ℃~+125 ℃

▲ When the humidity is 40 ℃, 90%

● Material introduction:

■ Basic information

When fitting a plug with a socket, there are both columnar protrusions around the pin hole for guidance and chamfered guidance at the front end of the plug part pin itself. Multiple guidance ensures a good fit between the plug and socket after installation.

■ Packaging and storage

The product is packaged in a blister box and then boxed. The packaging box is marked with the material code, specification and model, quantity, measurement unit, inspection signature, production date, unit name, contract number, etc. Each packaging box can only contain the same batch of products, and the packaging box has a mark that meets the corresponding transportation requirements specified in GB191.

Products packaged in boxes should be stored in a warehouse with an ambient temperature of 20 ℃ to 25 ℃, a relative humidity of less than 70%, and no acidic, alkaline, or other corrosive gases in the surrounding air. Under the above conditions, the storage period should not exceed 1 year from the production date.

■ Matching relationship

The plug assembly JDC-0402T-RT003 is used in conjunction with the socket JDC-0402Z-RT003.

■ Process Use

▲ Plug termination method: welding with printed board

▲ The fitting speed of the installed plug and socket is recommended not to exceed 5 times per minute.

During operation, the plug must be fully inserted into place when connected to the socket, and no additional devices are allowed to be added between the plug and socket mating surfaces to avoid

Affecting the contact reliability of connectors.

■ Outline dimension drawing