feature: Input voltage: maximum 220V, minimum 110V Output voltage: generally 5V or 12V Input current: Varies according to output voltage and load power Output power: depends on load capacity and output voltage Working frequency: generally 50Hz or 60Hz Advantage: 1. Versatility: Combination AC-DC and split power options are available, and the module can be configured to fit most designs 2. Convenient and flexible: easy to maintain and replace. 3. Safe and reliable: waterproof, dustproof and durable, 4. Quick connection: plug-in connection, can be quickly connected and disconnected, convenient for daily use 5. Multiple interface options: such as circular connectors, square connectors, threaded connectors, etc.
Specifications
Component Type | 24 pin eatx power connector |
Gender | Header/Receptacle |
Header Pin Pattern (Left to Right) | Power/Signal |
Number of Contacts (Power) | 4 |
Number of Rows (Power) | 1 |
Number of Contacts (Signal) | $keyworrd{12} |
Number of Rows (Signal) | 3 |
Termination Style | Solder To Board |
Orientation | Right Angle |
Pitch (Power) | 6.35mm (0.250in) |
Pitch Signal) | 2.54mm (0.100in) |
Current Rating | $keyworrd{13}A max. for One Powered Contact |
Resistance (Power Contact) | Maximum for mated pair is 2mΩ |
Resistance (Signal Contact) | Maximum for mated pair is 20mΩ |
Dielectric Withstanding Voltage | $keyworrd{14}V DC for power ; $keyworrd{15}V DC for signal contacts |
Durability (Mating cycles) | $keyworrd{16} Mating Cycles |
Operating Temperature Range | -$keyworrd{13}°C to +125°C |
Material Housing | PPA, glass fiber reinforce, UL94V-0 |
Plating Contact area | 0.76μm (29.921μin) Gold |
ail Plating (Signal) | 1.98μm (78μin) Tin |
Tail Plating (Power) | 1.98μm (78μin) Tin |
Guide Feature | Guide Pin Pocket |
Packaging | Cartons or Tray |
1.How important is the overall quality of a 24 pin eatx power connector?
Being one of the top 24 pin eatx power connector manufacturers in China, We attach great importance to this detail. The overall quality of a power connector is very important. Poor quality connectors can cause electrical problems, such as shorts, arcing, and overheating, which can lead to equipment failure or even fire. High-quality connectors are designed to provide reliable, safe connections and are built to last.
2.How do you troubleshoot common issues with 24 pin eatx power connectors?
Being one of the top 24 pin eatx power connector manufacturers in China, We attach great importance to this detail. 1. Check the power source: Make sure the power source is working properly and is providing the correct voltage. 2. Check the power connector: Inspect the power connector for any signs of damage or corrosion. If the connector is damaged, replace it. 3. Check the wiring: Inspect the wiring for any signs of damage or corrosion. If the wiring is damaged, replace it. 4. Check the connection: Make sure the power connector is securely connected to the power source and the device. 5. Check the device: Make sure the device is working properly and is receiving the correct voltage. 6. Check the fuse: If the device is not receiving power, check the fuse to make sure it is not blown. If the fuse is blown, replace it.
3.About 24 pin eatx power connector payment method
Power connector payment method is a payment system that allows customers to pay for goods and services using their mobile phones. It is a secure and convenient way to make payments, as customers can use their phones to make payments without having to enter their credit card information. The system is also designed to be fast and easy to use, allowing customers to make payments quickly and securely. Power connector payment method is becoming increasingly popular as more businesses are beginning to accept it as a payment option.
4.What are the advantages of using a 24 pin eatx power connector instead of a wire-to-wire connection?
Our products & services cover a wide range of areas and meet the needs of different fields. 1. Power connectors provide a secure and reliable connection that is less prone to accidental disconnection. 2. Power connectors are easier to install and require less time and effort than wire-to-wire connections. 3. Power connectors are more resistant to vibration and shock, making them more reliable in harsh environments. 4. Power connectors are more efficient at transferring power, reducing the risk of overheating and fire. 5. Power connectors are more cost-effective than wire-to-wire connections, as they require fewer components and less labor.
5.Are there any options for PCB mount or panel mount 24 pin eatx power connectors?
Yes, there are a variety of power connectors available for PCB mount and panel mount applications. These include Molex, JST, Phoenix, and Amphenol connectors.
6.How do you select the appropriate locking mechanism for a 24 pin eatx power connector?
1. Consider the application: The type of locking mechanism you choose should be based on the application and the environment in which the power connector will be used. For example, if the connector will be used in a harsh environment, you may want to choose a locking mechanism that is more robust and resistant to corrosion. 2. Consider the size: The size of the power connector should also be taken into account when selecting a locking mechanism. If the connector is too small, then a locking mechanism that is too large may not fit. 3. Consider the cost: The cost of the locking mechanism should also be taken into account when selecting the appropriate locking mechanism for a power connector. If the cost is too high, then it may not be feasible to use the locking mechanism. 4. Consider the safety: The safety of the power connector should also be taken into account when selecting the appropriate locking mechanism. If the locking mechanism is not secure enough, then it could lead to accidental disconnection of the power connector.
7.Is there a specific sequence for connecting and disconnecting a 24 pin eatx power connector?
As one of the 24 pin eatx power connector market leaders, we are known for innovation and reliability. Yes, there is a specific sequence for connecting and disconnecting a power connector. The sequence is as follows: 1. Disconnect the power source from the device. 2. Disconnect the power connector from the device. 3. Inspect the power connector for any damage or corrosion. 4. Connect the power connector to the device. 5. Reconnect the power source to the device. 6. Test the device to ensure proper operation.
8.About 24 pin eatx power connector production skills training
Power connector production skills training is designed to help workers learn the skills needed to produce power connectors. This type of training typically covers topics such as the types of power connectors available, the tools and materials needed to produce them, and the steps involved in the production process. It may also include instruction on safety protocols and quality control measures. Training may be provided in a classroom setting or online.
9.How do you identify the proper orientation for a 24 pin eatx power connector?
We maintain a certain amount of R&D investment every year and continuously improve operational efficiency to provide better services to our cooperative customers. The proper orientation for a power connector can be identified by looking at the shape of the connector and the corresponding port. The shape of the connector should match the shape of the port, and the pins should line up with the holes in the port. Additionally, the connector should have a notch or other indicator that shows which side should be facing up.
10.About 24 pin eatx power connector warranty
Power connector warranties vary depending on the manufacturer. Generally, power connectors are covered by a limited warranty that covers defects in materials and workmanship for a specified period of time. The warranty period may range from one year to five years, depending on the manufacturer. Some manufacturers may also offer extended warranties for their power connectors. It is important to read the warranty information carefully before purchasing a power connector to ensure that it is covered by the warranty.
11.Can 24 pin eatx power connectors handle high voltages?
Being one of the top 24 pin eatx power connector manufacturers in China, We attach great importance to this detail. No, power connectors are not designed to handle high voltages. High voltage applications require specialized connectors that are designed to safely handle the high voltage.
12.Are there any safety standards that 24 pin eatx power connectors have to meet?
We operate our 24 pin eatx power connector business with integrity and honesty. Yes, power connectors must meet safety standards set by the International Electrotechnical Commission (IEC). These standards cover a range of topics, including electrical safety, mechanical strength, environmental protection, and electromagnetic compatibility.
13.Do 24 pin eatx power connectors have a maximum number of mating cycles?
As one of the top 24 pin eatx power connector manufacturers in China, we take this very seriously. Yes, power connectors typically have a maximum number of mating cycles. This number can vary depending on the type of connector and the manufacturer, but is typically between 500 and 1000 cycles.
14.How do you determine the appropriate wire gauge for a 24 pin eatx power connector?
We adhere to the principle of quality first and have a complete production quality management system and quality inspection process. The appropriate wire gauge for a power connector is determined by the current rating of the connector. The current rating is usually printed on the connector itself, and the wire gauge should be chosen to ensure that the current rating is not exceeded. The National Electrical Code (NEC) provides tables that list the maximum current rating for different wire gauges.
Tag:atx pcie power connector,3 pin molex power connector,4 pin circular power connector,motherboard sata power connector,graphics card power connector